Site Overlay

Avantree Orbit Manual: Your Ultimate Guide to Using the Avantree Orbit

Introduction: The Avantree Orbit is a versatile and user-friendly Bluetooth audio receiver that allows you to wirelessly stream music or calls from your smartphone, tablet, or computer to any device with a 3.5mm audio input. With its compact design and impressive features, the Avantree Orbit has become a popular choice among music enthusiasts and professionals worldwide. In this article, we will provide you with an in-depth manual on how to effectively use the Avantree Orbit, ensuring you make the most out of this incredible device.

Outline: I. Understanding the Avantree Orbit A. Overview of Features B. Benefits of Using the Avantree Orbit II. Getting Started with the Avantree Orbit A. Unboxing and Contents B. Charging Your Device III. Pairing and Connecting Devices A. Pairing Mode B. Connecting to Mobile Devices IV. Advanced Features and Functions of the Avantree Orbit A. Dual-link Mode B. Multipoint Technology V. Troubleshooting Common Issues with the Avantree Orbit VI.Conclusion


I. Understanding the Avantree Orbit

A) Overview of Features: The Avantree Orbit offers a range of features designed to enhance your audio experience seamlessly.

  • Bluetooth v4.1 technology ensures stable connectivity up to 10 meters (33 feet).
  • Built-in microphone allows for hands-free calling.
  • AptX low latency codec for minimal audio delay.
  • Long-lasting battery life provides up to 10 hours of playback time.
  • Compact, lightweight design makes it convenient for travel.

B) Benefits of Using the AvanTree: Using this device comes with several advantages that set it apart from other similar products on the market.

  1. Wireless Convenience: With the Avantree Orbit, you can say goodbye to tangled wires and enjoy a wireless audio experience. Stream music, podcasts, or make calls without being tethered to your device.

  2. Portable Design: The compact and lightweight design of the Avantree Orbit allows you to take it anywhere with ease. Whether you’re on-the-go or simply enjoying some leisure time at home, this device effortlessly fits into your lifestyle.

  3. Dual-link Mode: One notable feature of the Avantree Orbit is its dual-link mode, enabling two Bluetooth devices to connect simultaneously. This means you can seamlessly switch between devices without having to constantly unpair and pair anew.

  4. Multipoint Technology: The multipoint technology incorporated into the Avantree Orbit further enhances its functionality. It enables you to connect two different mobile devices simultaneously, making it perfect for multitasking or sharing your favorite audio content with others.

II. Getting Started with the Avantree Orbit

A) Unboxing and Contents: When you first receive your Avantree Orbit, ensure that all components are present in the box. The contents typically include:

  • Avantree Orbit Bluetooth receiver
  • 3.5mm AUX cable
  • USB charging cable
  • User manual

B) Charging Your Device: Before using for the first time, it’s essential to charge your Avantree Orbit fully.

  1. Connect one end of the USB charging cable to a power source (e.g., computer or wall adapter).
  2. Insert the other end of the USB cable into the charging port located on the side of the device.
  3. Allow approximately 2 hours for a full charge.
  4. The LED indicator light will turn solid blue when fully charged.

III. Pairing and Connecting Devices

A) Pairing Mode:

  1. To enter pairing mode on your Avantree Orbit, press and hold down the power button until the LED indicator light flashes red and blue alternately. This indicates that the device is ready to connect with your Bluetooth-enabled device.
  2. Note: If the Avantree Orbit has already been paired with another device, ensure it is disconnected before entering pairing mode.

B) Connecting to Mobile Devices:

  1. Activate Bluetooth on your smartphone, tablet, or computer by going into the settings menu.
  2. Locate and select "Avantree Orbit" from the list of available devices on your mobile device’s Bluetooth settings.
  3. Once connected, the LED indicator light on the Avantree Orbit will turn solid blue, indicating a successful connection.

IV. Advanced Features and Functions of the Avantree Orbit

A) Dual-link Mode: The dual-link feature allows two Bluetooth devices to be connected simultaneously, eliminating the need for constant pairing and unpairing. Follow these steps:

  1. Connect one device following the pairing instructions mentioned earlier.
  2. To connect a second device, press and hold down both volume buttons until you hear a voice prompt confirming that dual-link mode has been activated.
  3. Pair and connect your second device as described in Section III B.

B) Multipoint Technology: Multipoint technology allows you to connect two different mobile devices simultaneously. Here’s how:

  1. Connect one mobile device following the pairing instructions mentioned earlier.
  2. To pair additional devices, repeat step 1 with each new device you want to pair (up to a maximum of two devices).
  3. The Avantree Orbit will automatically switch between devices based on audio input activity.

V. Troubleshooting Common Issues with the Avantree Orbit

Despite its user-friendly design, you may occasionally encounter some issues while using the Avantree Orbit. Here are a few troubleshooting tips:

  1. Unable to Pair/Connect:
  • Ensure that Bluetooth is enabled on your mobile device or computer.
  • Make sure your Avantree Orbit is in pairing mode.
  • Check that your devices are within the operational range (10 meters/33 feet).
  1. Poor Sound Quality:
  • Ensure both the Avantree Orbit and your connected device are fully charged.
  • Check for any physical obstructions between the devices.
  • Try moving closer to improve signal strength.
  1. Audio Lag/Delays:
  • Confirm that you’re using a mobile device or computer that supports low-latency audio transmission, such as aptX.
  • Avoid running multiple apps/tasks that may strain your device’s processing power and cause delays.

VI. Conclusion: The Avantree Orbit is an excellent Bluetooth audio receiver perfect for anyone seeking wireless convenience and versatile functionality. With its easy-to-use features, outstanding sound quality, and compact design, the Avantree Orbit offers an exceptional audio experience wherever you go. By following this comprehensive manual, you can effortlessly maximize the potential of your Avantree Orbit and enjoy seamless wireless audio connectivity at all times.