Are you tired of dealing with cords and wires when it comes to your audio devices? Enter the Avantree DG80 Bluetooth adapter. This handy device allows you to convert any wired audio device into a Bluetooth-compatible one, so you can stream music or podcasts wirelessly from your phone or computer. In this guide, we’ll walk through everything you need to know to get started with your Avantree DG80 adapter, including initial setup, troubleshooting tips, and more.
## Introduction: What is Avantree DG80?
The Avantree DG80 is a high-quality Bluetooth adapter that enables you to stream audio wirelessly from any wired device. Simply plug the adapter into the headphone jack of your audio source, pair it with your smartphone or computer via Bluetooth, and start streaming.
With its small size and easy-to-use interface, the Avantree DG80 is perfect for anyone looking for an affordable way to upgrade their audio system without sacrificing quality.
## Setting up Your Avantree DG80
Setting up your Avantree DG80 adapter is easy – just follow these simple steps:
Step One: Unboxing Your Adapter
Start by unboxing your new adapter and making sure all necessary components are included in the package. You should have:
– The Avantree DG80 Bluetooth Adapter
– A USB charging cable
– An instruction manual
Step Two: Charging Your Adapter
Before using your new adapter, make sure it’s fully charged. To do this, connect the USB charging cable included in the package to a power source (such as a computer) and connect it to the charging port on the bottom of the adapter. The LED light will turn red while it’s charging and will turn blue once it’s fully charged (this process usually takes about two hours).
Step Three: Pairing Your Devices
Once your adapter is charged, it’s time to pair it with your audio device. Turn on Bluetooth on your smartphone or computer and search for available devices. Select “Avantree DG80” from the list of available devices and wait for the pairing process to complete.
Once paired, you’ll be able to stream music wirelessly from your device to your audio system.
## Troubleshooting Tips
While using the Avantree DG80 adapter is generally straight-forward, you might run into a few issues along the way. Here are some common problems and how to fix them:
– The adapter won’t connect: Make sure both your audio source and the adapter are turned on and in close proximity. Also, ensure that Bluetooth is turned on and that both devices have enough battery life.
– Poor sound quality: Check that the volume level on both devices is set appropriately. If there’s still an issue, try moving the adapter closer to your audio source or adjusting its position.
– No sound coming through: Ensure that the audio cable you’re using works properly (try switching out cables if necessary). Also, make sure that your audio source is set to output sound through its headphone jack.
If none of these solutions work, consult the instruction manual or reach out to Avantree customer support for assistance.
## Benefits of Using an Avantree DG80 Adapter
Switching over to a wireless audio setup offers numerous benefits — here are just a few reasons why you should consider investing in an Avantree DG80 Bluetooth adapter:
– Convenience: Say goodbye to tangled cords and wires cluttering up your space – with an Avantree DG80 adapter, you can enjoy wireless streaming from any wired device.
– Better Sound Quality: Wires can often limit sound quality due to interference or signal loss. By converting wired devices into wireless ones with high-quality adapters like this one, users can experience better overall sound quality.
– Compatibility: The Avantree DG80 is compatible with a wide range of audio devices, including TV’s, headphones, and speakers. This allows users to upgrade their whole system without replacing all their equipment.
The Avantree DG80 Bluetooth adapter is a game-changer for anyone looking to upgrade their audio setup. With easy-to-follow setup instructions and excellent sound quality, it’s an affordable way to experience the benefits of wireless streaming.
Simply plug in your wired device into the adapter, connect via Bluetooth with your smartphone or computer, and enjoy high-quality sound without any wires. So what are you waiting for? Try out the Avantree DG80 today and elevate your listening experience!